120 SERIES: Boiler Water Treatment Chemicals & Compounds

AQUADET-121

Anti-Scalent & Sludge Conditioner

Chelating Action: Based on organic-inorganic agents that form water-soluble sludge for easy blow-down.
Polymeric Coating: Prevents precipitate adhesion to boiler surfaces.
Corrosion Shield: Glossy phosphate-based inhibitor prevents internal metal degradation.

Form: Liquid
Composition: Chelates + Dispersants + Phosphate
Dosage: Per feed water analysis

AQUADET-122

Smoke Tube Boiler Descalant Specialist

Internal Treatment: Optimized for soft water smoke tube boiler systems.
Existing Scale Removal: Powerful dispersant aids in the removal of existing Calcium/Iron deposits.
Peak Energy Efficiency: Keeps heat transfer surfaces clean to reduce industrial fuel and energy loss.

Form: Liquid
Target: Soft Water Boilers
Action: Fluidizing sludge conditioner

AQUADET-123 to 129

Ancillary Boiler Chemical Support

The complete boiler treatment range includes specific formulations for industrial pH control and oxidation management:

AQUADET-123: Pure Sludge Conditioner
AQUADET-124: High-Performance Polymer Scale Inhibitor
AQUADET-125/126: pH Boosters (Inorganic/Organic)

AQUADET-127: Alkalinity Reducer
AQUADET-128: Inorganic Oxygen Scavenger
AQUADET-129: Organic Oxygen Scavenger

130 SERIES: Cooling Tower Water Treatment & Management

AQUADET-131

Oxidizing Biocide Chemical

Chemistry: Stabilized Bromine-based liquid biocide for cooling towers.
Efficiency: Highly active in high pH (Alkaline) waters and ammonia-contaminated systems.
Profile: Environmentally friendly; white to pale yellow liquid appearance.

Dosage: 30 PPM based on makeup water

Miscibility: Complete in water
Application: Twice weekly slug dose
Stability: Excellent shelf stability

AQUADET-132

Non-Oxidizing Industrial Biocide

Target: Broad-spectrum microbiological control including algae, bacteria, and fungi.
Synergy: Often used in rotation with 131 biocide to prevent microbial resistance.

Dosage: 40 PPM of total system volume

Chemistry: CMIT/MIT Based
pH Range: Effective across broad ranges

AQUADET-133

Cooling Water Scale & Corrosion Inhibitor

Protection: Specifically protects Yellow Metals (Copper) and Mild Steel pipelines.
Mechanism: Organo-phosphate based inhibitor prevents hardness scale formation.

Dosage: 30 PPM in re-circulating water

System: Open Re-circulating Cooling Water
Stability: High Alkalinity stability

AQUADET-134

Bio-Dispersant & Slime Cleaner

Function: Penetrates and fluidizes biological slime and bio-fouling for easy removal.
Safety: Non-corrosive, non-foaming, and biodegradable alkyl diamine formulation.

Dosage: 16 PPM in re-circulating water

Type: Surfactant/Dispersant
Action: Enhances biocide efficacy

AQUADET-135 to 139

Advanced Cooling Modifiers & Dispersants

AQUADET-135: High Silica Dispersant
AQUADET-136: Iron Oxide Dispersant
AQUADET-137: Deposit Control Polymer

AQUADET-138: Carbamate-Based Biocide
AQUADET-139: Closed-Loop Corrosion Inhibitor

140 SERIES: Reverse Osmosis (RO) Membrane Solutions

AQUADET-141 / 142

RO Plant Antiscalants & Dispersants

AQUADET-141: Silica Antiscalant Specialist (handles up to 120 PPM in reject water). Polymer-free organic chemical formula.
AQUADET-142: High TDS Antiscalant Specialist (designed for feed water up to 5000 PPM TDS).

Dosage: 2 to 5 PPM in Feed Water

Dose Point: Prior to micron filter
Compatibility: All PA Membranes

AQUADET-143 / 144

CIP RO Membrane Cleaning Chemicals

143 (Alkaline Cleaner): Removes organic debris, bio-fouling, and organic sludge.
144 (Acidic Cleaner): Removes insoluble sulphates (Barium, Strontium, Calcium) and Carbonate scales.

pH (144): < 2.0 (1% Solution)
CIP Concentration: 3% - 4% solution
CIP Pressure: 3-4 Kg/cm²

Flow Rates: 4" Membrane: 3-4 m³/hr | 8" Membrane: 8-10 m³/hr. Discard product water for first 15-30 mins after CIP.